Grand Effects
360 Fire-Water Bowls and Fire-Water Inserts (Automated Operation)
Operating and Maintenance Instructions
Section 4: Maintenance
Periodically clean the burner assembly and bowl with a wet cloth or cleaning solution to
remove carbon build-up.
Frequency of the cleaning will depend on usage.
Frequently inspect the gap between the base of the bowl and the mounting bracket. It
should be kept free of dirt and debris that may restrict cooling air and drainage.
Periodically inspect the underside of the burner assembly for any signs of excessive
temperatures.
Check that all gas connections are tight.
The unit should be cycled frequently, especially after a rain. The burner assembly will
not work in snow and ice conditions. The burner assembly should be covered and
protected from snow and ice. The burner should not be operated in high wind
conditions. High winds can limit the cooling air required for cooling of the burner
assembly and cause overheating of the electronics.
Important:
The system needs to be turned on/off after a rain to remove any water in the
pilot area.
Note:
If any problems are present, consult a licensed heating specialist, or call Grand
Effects.
www.grandeffectsinc.com
949-697-5270
10
