10
9
GrandCanyonGasLogs.com
INSTALLATION
Insert the assembled burner and control system into the
fireplace centering the burner left to right and front to
back. With the provided flex line and brass connection
fitting connect the gas inlet into the fireplace to the gas
inlet on the valve control system. NOTE: Make sure
the battery pack/receiver is located in the front right on
the fireplace. DO NOT place the battery pack/receiver
underneath the burner or in the back of the fireplace.
Using soapy water, spray the gas connections to ensure
there are no leaks once the gas supply is turned on.
NEVER use an open flame to check for leaks.
Follow the burner installation manual as well as the log
placement guide for final set-up.
This includes the embers, vermiculite (LP Only),
lava rock and logs.
