27
12.1 CLEANING THE BOILER
Section cleaning should only be performed by a service technician and must only be performed
when the boiler is out of service. The following steps should be followed:
•
Remove the 2 front panels by sliding it upwards to release and then pull to remove.
•
Open the front swing door by removing the four bolts; this will expose the chamber area as
well as the second and third passes.
(A)
•
Remove the stainless steel baffles. With a cleaning brush clean the boiler section, second
and third passes
. (B)
•
Remove insulation and the smoke hood cleaning access door from the rear section.
Remove any soot that may have collected in the smoke hood
. (C)
Baffles
cleaning
C access
door
A B C
•
Replace insulation on the rear section and smoke hood.
•
Replace swing door and tighten bolts.
•
Refit the front casing.
12.2 BURNER NOTES
Your burner manufacturer has supplied instructions for servicing and maintenance should be
performed as instructed. In addition, the following fuel and related items should be serviced on
a regular basis:
•
Service fuel filters and fuel unit.
•
Service burner housing and fan.
•
Replace nozzle using only the size and type recommended by the boiler manufacturer.
•
Service ignition system.
•
Perform testing and check for proper operation of the primary control.
12.3 PERFORM COMBUSTION TEST
The burner must be adjusted to insure proper CO
2
levels with no more than a slight trace of
Smoke. Continue adjustments until the proper level is achieved. See page 18, 19 and 20.
Summary of Contents for B*C-3 sections
Page 25: ...24...
Page 26: ...25 Trouble Shouting the HydroStat 3250...
Page 29: ...28 13 0 EXPLODED PARTS VIEW Exploded Parts View...
