A
B
C
D
E
F
G
.2
Delivery modules
The Wardrobe lift is delivered in a box. The parts acc.
picture 2 shall be installed acc. to the installation
instruction. See section 4.4.
The packaging material shall be handed over to an
organized material re-cycling organisation.
A - Lift mechanism, left
B - Lift mechanism, right
C - Control unit
D - Handheld control unit with spiral cable
E - Rail tube
F - Hanger for handheld control
G - 12 off screw 4x16 mm
4.3
Location of the electric connection
The Wardrobe lift must be connected to a separate mains switch, which is
placed outside the wardrobe.
A projecting socket 230 V, 50 Hz / 120 V 60 Hz shall be installed in the wardrobe acc.
230 V, 50 Hz / 120 V 60 Hz shall be installed in the wardrobe acc.
shall be installed in the wardrobe acc.
picture 3, 5 cm below the lifting mechanism, on the cabinet side.
Be careful with the location and fastening of the cables, so that they cannot
be damaged
* Power consumption 720 W (120 V) or 575 W (230 V)
.1
Mechanical construction
The Wardrobe lift 717 comprises two lift mechanisms, to be placed on the left and right
side in the wardrobe. The rail tube connects the mechanisms together. See picture 1.
The curved lifting and lowering motion is achieved by an electrically powered screw
jack with a control unit, containing a contactor and the control voltage transformer for
24 V DC control voltage.
Picture 1
Picture 2
Picture 3
Only an authorized electrician may carry out the installation!
