background image

10

.1 

Safe use

The Wardrobe lift is provided with safety arrangements in order to prevent and avoid damages and accidents. It is however still 
very important that the operator is well instructed in how to install and operate the Wardrobe lift.

• 

Only use the Wardrobe lift for its intended purpose, i.e. storing of clothes. 

• 

The operation and use must be made in such way that there is no risk for damages on persons and property.

• 

The Wardrobe lift may only be operated by persons who have read and understood these instructions, and are  

 

authorized to use it. 

• 

Be aware of that you as an operator are responsible for that nobody is damaged.

• 

The Wardrobe lift and the work area must be in proper condition. The Wardrobe lift must not be used if any fault has  

 

appeared which influences the functions or the operation safety. It shall also not be used if it has been repaired, 

 

altered or adjusted without permission of a responsible person.

• 

Make sure that the Wardrobe lift is installed on firm, flat and absolutely vertical walls with sufficient mounting details,  

 

enough for the total weight. Competent persons shall carry out the installation work.

• 

The operator shall have a clear view of the hazardous parts of the Wardrobe lift, the cabinet and the area around it all  

 

the time when operations are taking place.

• 

Do not touch any part of the lift when operating it. Only press the button for desired motion direction.

• 

Do not put hands, arms, or any other part of the body or any object in the lifting device when the Wardrobe lift is   

 

brought from the parking position. The parking position means when the Wardrobe lift is fully raised and brought to  

 

the wall, i.e. at the top level.

• 

The wardrobe door shall be fully open when the Wardrobe lift is operated.

• 

Keep in mind that when the Wardrobe lift has left the parking position, the risk increases to get damaged by the lift or  

 

the open door. 

• 

Do not lower the Wardrobe lift unless the space below it is free from persons or obstacles.

• 

Observe the trapping risk between the Wardrobe lift and the wardrobe walls.

• 

Only stabile and securely loaded items may be handled. Hangers must be suitable for the clothes, and in good condition.

• 

Never let the Wardrobe lift come in contact with adjacent objects. 

 

• 

Alterations of the Wardrobe lift that influence the operational safety or the functions are not allowed.

• 

Decals and markings must not be removed or made illegible.

• 

Do not overload the Wardrobe lift.

• 

Use safe and sufficient lifting methods when handling clothes to and from the Wardrobe lift. In particular beware  

 

when handling heavy items, and clothes with dangerous content or sharp parts, such as needles.

• 

The Wardrobe lift shall regularly, once a year, be inspected in order to prevent accidents.

• 

Applicable Building and Safe use Regulations must be complied with.

• 

It is forbidden to stay in the wardrobe, to hang on the Wardrobe lift or to use the lift for lifting persons.

• 

Do not use the Wardrobe lift as a lifting jack, e.g. for lifting things from the floor.

• 

Do not use the Wardrobe lift in a potentially explosive environment.

• 

When the operation is in a public location, particularly when children can enter the work area, the operator shall make  

 

satisfactory arrangements to prevent persons from entering the hazardous area when the lift is being operated, or  

 

it has been lowered from the parking position, e.g. by means of blocking the work area or by means of adding 

 

protection devices.

• 

During inspections, service and repair work there shall be no clothes on the lift. 

• 

Competent persons only must carry out installation, service and repair works.

•   

Only Granberg original spare parts shall be used when replacing any parts. Our warranty commitment can otherwise  

 

be invalidated.

Summary of Contents for 717 Series

















Reviews: