12
.
Cleaning
In its use in a house the mechanism can be exposed to dirt. As the Wardrobe lift contains electrical components it is very
important that cleaning is made according this instruction.
WARNING!
* The Wardrobe lift must absolutely not be connected to the electric supply when cleaning is carried out.
* The Wardrobe lift must absolutely not be rinsed with water!
Care instructions:
The Wardrobe lift is cleaned with lukewarm water and a non-scratching detergent containing soap or similar. Use a Wettex
swab or similar. After cleaning the surfaces shall be dried to avoid lime deposits.
Scratching detergents or tools e.g. steel wool may not be used.
The wardrobe shall be cleaned and maintained in accordance with the manufacturers’ instructions.
.6
Maintenance
The Wardrobe lift is maintenance-free. Greasing and other actions are made during the manufacturing for the lifetime of the
lift. From safety point of view however some components shall be inspected each year.
* Inspections, service and repair work shall be made by competent persons.
* Remove the objects from the Wardrobe lift before maintenance and repair works are made.
1.
Run the lift down and up all the way to resp. end position. Check that it runs freely without trapping risks and jarring
sounds. Check that it stops and stays in the lower resp. upper positions.
2.
Check that the cables are not chafed, squeezed or breaking.
3.
Check that the attachments are in proper order.
Accomplished inspections and repair works shall be specified in the service records in section 9.
6.
Instructions for recycling
When the Wardrobe lift shall be re-used shall it must be cleaned, inspected and go through a full operation test before it is
installed on the new site.
We recommend the machine to be sent to Granberg or to the Granberg distributor to get this done.
The machine is manufactured from re-usable materials or from materials that can be recycled.
