WHEEL LOCKS
Adjust wheel locks
M5 hex key
Wheel Lock In Unlocked and Locked Positions
Locked
Unlocked
1. Ensure the wheel lock is unlocked
(pull the handle toward the back of the
wheelchair).
2. Use the M5 hex key to slightly loosen (do
not remove) the two socket head cap
screws, shown at right, that secure the
mounting clamp.
3. Once loosened, slide the adjustment rod
that holds the wheel lock components,
shown at right, to the desired position and
tighten.
4. Engage the wheel lock (push the handle
toward the front of the wheelchair) and
measure the depth it is embedded into
the tire. When engaged, the wheel lock
shoe must be embedded in the tire at least
1
/
8
in. to
1
/
4
in. (.32 cm to .64 cm) to hold
the tire in place.
5. Repeat steps 1 through 4, if necessary,
until the
1
/
8
in. to
1
/
4
in. (.32 cm to .64 cm)
measurement is obtained.
WARNING: Ensure both wheel locks
are adjusted so that they lock in place
appropriately before occupying or
operating wheelchair.
Socket Head Cap Screws
Mounting Clamp
Adjustment Rod
Handle
Shoe
Adjust Wheel Lock
(Shown Locked)
22
EJ_PT3000-18-INS-LAB-RevC22
www.grahamfield.com
