background image

OPERATING SEAT TILT

PureTilt Shown Tilted

Operating Seat Tilt: by User

  WARNING: Always engage the wheel locks, lock the arms into place, and lower the 

footplate before tilting the seat. Ensure anti-tippers are installed and in proper location. 

  WARNING: Avoid accidental actuation of seat tilt and footrest levers.

1.  Sit on the wheelchair with your feet resting on the footplate. Ensure wheel locks are engaged 

and arms are locked in place.

2.  Locate the tilt handle, circled in red above, on the right arm.
3.  To tilt the seat backward, squeeze and hold the tilt handle, push against the arm, and lean 

backward.

4.  Release the tilt handle at desired degree of tilt to lock the seat into position.
5.  To bring the seat back to upright position, grasp the tilt handle, lean forward, and pull your 

body weight forward.

6.  Release tilt handle at upright position to lock the seat into position.

Operating Seat Tilt: by Caregiver

  WARNING: Always engage the the wheel locks, lock the arms into place, and lower the 

footplate before tilting the seat. Ensure anti-tippers are installed and in proper location.

1.  Have the user sit on the wheelchair with feet resting on the footplate. Ensure the wheel locks 

are engaged and the arms are locked in place. Locate the tilt handle, circled in red above, on 
the right arm. Stand on this side of the wheelchair.

2.  To tilt the seat backward, squeeze and hold the tilt handle while pushing the back backward.
3.  Release the tilt handle at the desired degree of tilt to lock into position.
4.  To bring the seat back to upright position, squeeze and hold the the tilt handle while pulling 

upward on the push handle.

  WARNING: Ensure the back is in fully upright position and the arms are locked into place 

before operating wheelchair.

 16

EJ_PT3000-18-INS-LAB-RevC22 

 

www.grahamfield.com

 

Summary of Contents for Everest Jennings PURETILT PT3000-18

































Reviews: