EJ87X-1-INS-LAB-RevA17 • EJ87X-1 Transport Chair
18
Check rear wheel adjustment
Inspect the wheels at least once a month. Check alignment by elevating the rear of the
Transport Chair on a stable object until the rear wheels clear the ground, or placing the
Transport Chair upside down in a stable position such that the wheels can spin freely. Spin
the wheels; there should be no wobble or sideplay, and the wheels should spin freely without
binding. The bearings should be clean and rotate smoothly. If there is a problem, contact your
GF authorized distributor. If adjustment is required, this should be done by your GF authorized
distributor only.
Check arms
Check arms at least once a month. Inspect for sharp edges or cracks which could weaken the
arm, and replace if found. Ensure that all attaching screws are present and tight. Use a Phillips
screwdriver to tighten arm pad mounting screws. Check for burrs on the screw heads and
replace if found. Ensure that screws do not extend into the padding.
Check backposts / push handles
Check backposts at least once a month. Ensure that all mounting hardware is securely fastened
and that the backposts are not bent or damaged. Ensure that back folding mechanisms
are secure, work correctly, and that there is no play in back fold points. Contact your
GF authorized distributor if you observe back play, cracking or peeling paint or plating.
Check footrests
Check footrests at least once a month. Inspect the locking mechanisms to confirm sure fit.
Check for cracks, burrs, or sharp edges, and replace if found. Ensure that the footrest will
automatically lock securely in place and will not accidentally unlock.
Cleaning your Transport Chair
Wipe off base and seat frame frequently, at least once a week, using a soft cloth. Dry the
Transport Chair immediately if exposed to moisture. Clean the frame every three months with
a mild soap and water solution. The frame does not need to be waxed. Do not use solvents,
abrasive waxes, caustic chemicals or spray silicone. Never use abrasive cleansers; they could
scratch the finish. Never use steam or high pressure cleaners. Clean upholstery and plastic
components at least once a month with a mild soap and water solution.
Check casters
Check the caster stems for proper rotation at least every three months. The caster fork must
swivel freely to facilitate steering and handling. Adjusting the stem nut varies the amount of
force required to turn the caster. If the nut is too loose, the caster will flutter or shimmy; if
the nut is too tight, the Transport Chair will be difficult to steer. If the caster stem requires
adjustment, or the stem bearings require replacement, contact your GF authorized distributor.
Ensure that stems are firmly attached to forks, and that forks and stems are not bent. Evaluate
all threads, locking nuts and bearings.
Check wheel bearings
Have your GF authorized distributor check caster and rear wheel axle bearings at least every
six months.
