manualshive.com logo in svg

Graham Field Everest & Jennings EJ87X-1, Operation Manual, Page: 12 / 24

Share
Download
Graham Field Everest & Jennings EJ87X-1 Operation Manual Download Page 12

EJ87X-1-INS-LAB-RevA17 • EJ87X-1 Transport Chair 

12

4  ADJUSTMENTS

The EJ87X-1 Transport Chair offers several adjustments to make it easier and more comfortable 
to operate. Section 7, MAINTENANCE, offers preventive maintenance suggestions for keeping 
your Transport Chair in excellent condition; ensure that all components are in excellent 
condition before adjusting. The following are recommended methods; after a few adjustments, 
you may develop your own. Always consult your GF authorized distributor for assistance.
The person performing adjustments on the Transport Chair has the responsibility of 
making certain that the user and attendant can safely operate the Transport Chair with the 
adjustments selected. This person must evaluate the user's ability, weight, physical condition, 
the environment in which the Transport Chair will be used, and the terrain over which the 
Transport Chair will travel.
All adjustments and their page locations are referenced in the index at the end of this manual. 
Specific tools needed to perform each adjustment are identified in adjustment directions. Most 
of the following adjustments can be performed with the wrench and hex key included with your 
EJ87X-1 Transport Chair.

REAR WHEEL & CASTER

We recommend that you do not replace or adjust rear wheel or caster components yourself, 
since special tools and training are required. Contact your GF authorized distributor when your 
rear wheels or casters need adjustment.

CROSSBRACE

Tighten crossbraces

Tools required: included wrench and hex key

Check the crossbraces to ensure that the bolts and nuts that fasten the crossbraces in the 
center of the Transport Chair are secure (crossbraces should be loose enough to fold easily, 
yet snug enough to take up excess play). Use the included tools to tighten the crossbraces.

Summary of Contents for Everest & Jennings EJ87X-1

























Reviews:

No comments