EJ87X-1-INS-LAB-RevA17 • EJ87X-1 Transport Chair
14
5 TRANSPORTING THE EJ87X-1 TRANSPORT CHAIR
PREPARING THE EJ87X-1 FOR TRANSPORT
WARNING: This Transport Chair does not offer seating or occupant restraint equivalent
to the seat provided in a motor vehicle! To increase your safety while traveling in a
motor vehicle, always transfer to the vehicle seat and use the restraint provided by the
vehicle manufacturer.
When transporting the Transport Chair in a motor vehicle, do not place the Transport
Chair where it will interfere with the safe operation of the vehicle or endanger the driver or
passengers. The front seat is not a good location to store a Transport Chair during transport,
as the Transport Chair can be dislodged and become a serious hazard to the vehicle driver.
Always take precautions to avoid personal injury when loading or lifting a Transport Chair into
or out of a vehicle. The Transport Chair can easily be transported in the rear seat or the trunk.
carrying strap
seat upholstery
upper
back
footrest
upper back
release lever
Transport Chair
shown unfolded
Transport Chair
shown folded
Fold the Transport Chair (see picture above)
1. Swing back or detach footrests from Transport Chair.
2. Fold the back: Press both upper back release levers toward the upper back until the back
releases, then lower the upper back.
3. Fold the Transport Chair: Pull up sharply on the seat upholstery at front and rear center at
the same time. Tip the Transport Chair sideways so the opposite wheel doesn't drag. Press
the sides together.