Remote Control operation
On first use, enable the remote control battery by pulling out the strip of
cellophane at the bottom of the remote control.
Standby –
Puts the Crystal into Standby mode.
Mute
– Mutes the audio, pressing again re-enables the audio.
Forward/back –
Have the same function as the Decrement track/Frequency
and Increment track/Frequency on the main control panel.
Play/Pause –
Has the same functions as the Play/Pause button on the main
control panel.
Volume Increase/Decrease -
Press the
–
button repeatedly to decrease the
volume until the desired level is achieved.
Press the
+
button repeatedly to increase the volume until the desired level
is achieved.
Equalisation -
There are six pre-set equaliser settings to increase your
listening pleasure. Pressing the EQ button cycles through the pre-sets.
Track Select Buttons
You can move directly to the track of your choice by keying in the number of
the desired track.
Pressing (1) then (2) will select track 12.
7
Standby
Play/Pause
Equalisation
Select Track
by Number
FM/Flash Select
Mute
Forward/Back
Volume Increase/Decrease
RPT = Repeat Mode
U/SD = Media Select
