M
AINTENANCE
AND
S
ERVICE
6–3
R
EPAIRING
Gelcoat is a very durable material but is susceptible to scratches, blistering, and web-like
cracks (crazing) over time. Gelcoat is elastic enough, however, to withstand strong blows
while flexing with the hull's movement. Gelcoat problems are cosmetic and will not effect the
structural integrity of your boat. Some gelcoat damage and imperfections such as nicks and
scratches can be repaired by obtaining a color match patch kit. This kit and instructions can be
purchased through your Grady-White dealer. Acetone, a cleaning agent for gelcoat, can also
be purchased through your dealer.
B
OTTOM
P
AINT
If you leave your boat in the water for more than a few days the hull bottom, below the water-
line, should be treated with anti-fouling paint. This paint will help protect the bottom from marine
growth and barnacles that inhibit performance. Since anti-fouling paint slowly dissolves, yearly
inspection and cleaning of the hull bottom to prevent marine growth is advised. Repaint whenever
necessary. We suggest the use of an epoxy barrier coat to be applied in conjunction with the anti-
fouling paint to help prevent blistering. For more information, see your local dealer.
G
RADY
D
RIVES
Moisture may enter the engine bracket, so, a drain has been provided. Any moisture entering
the bracket should drain to the bottom. The drain plug should be removed periodically to drain the
bracket. The Grady Drive is made of aluminum, therefore, use the proper type of bottom paint.
C
ANVAS
Grady-White’s canvas is made using the highest quality vinyl and latest sewing techniques.
The canvas will not be completely leak proof. The seam holes in your canvas may stretch and tend
to leak. However, you can correct this problem by applying *Apseal® or Uniseal™ to the seams.
Please understand that Grady-White does not warrant the fit and design of the canvas to be
entirely watertight.
W A R N I N G
M.E.K. (Methyl ethyl ketone peroxide), gelcoat and acetone are flammable and
hazardous chemicals that must be handled properly. Follow instructions on the containers
carefully. Be aware that gelcoat produces heat and puts off fumes; therefore, when you
are finished with catalyzed chemicals, submerse completely in water until cool.
!
