
2 8 2 S
A I L F I S H
8–10
Battery Charger
This component is located in the aft rigging compartment near the batteries. For this charger
to work, the dockside power must be operating. Turning the breaker switch at the AC panel to
the on position activates the charger. The charger has a built in isolator that senses the
charging needs of all the batteries and distributes charge accordingly. At the point that all of
the batteries are nearly fully charged, the charger will automatically reduce the current being
sent to the batteries to a maintenance level. For more information refer to the Operation
Manual for the battery charger.
Microwave
The dockside power must be connected for the microwave to function. Refer to the Operation
and Maintenance manual for specific instructions on the safe and proper use of the
microwave.
Water Heater
The water heater will provide hot water to the pressurized fresh water system if the dockside
power is connected and the AC breaker switch is on. Follow the Operation and Maintenance
manual for the proper use and care of the water heater.