manualshive.com logo in svg

Grady-White Boats SAILFISH 282, Owner'S Manual, Page: 50 / 78

Share
Download
Grady-White Boats SAILFISH 282 Owner'S Manual Download Page 50

2 8 2   S

A I L F I S H

8–6

C

OCKPIT

 S

HOWER

To operate the cockpit shower, the water pressure switch located on the accessory switch 

panel must be in the on position. Open the cover and pull the shower wand from the recessed deck 
fitting. Depress the button on the back of the wand to spray water. To reinstall the shower wand 
into the recessed fitting, gently feed the hose down through the deck and replace the cover on the 
fitting.

H

EAD

 S

HOWER

The water pressure switch located on the accessory switch panel activates the head shower. 

After turning this switch on, the shower water flow can be controlled by the head shower fixture.

W

INDSHIELD

 W

ASHER

 S

WITCH

A valve located in the starboard deckwing controls your windshield washer. Water may be 

sprayed on the windshield by opening this valve with the Fresh Water System pressurized (the 
water pressure switch on the accessory switch panel must be in the on position). This water is 
supplied from the fresh water tank.

T

RANSDUCER

 F

LATS

The inverted transducer flats are designed primarily for a bronze style torpedo-shaped 

transducer. An example of a torpedo shaped unit would be an Aero Mar Tri-Transducer. This 
transducer is approximately ¾” thick. This thickness allows the transducer face to protrude below 
the bottom of the hull. An additional ½” spacer may be installed between the hull bottom and the 
transducer for optimum results. The transducer should be installed as far forward on the flat as 
possible, and parallel with the keel.

H

ARD

 T

OP

Do not use the hard top for storing heavy or large items such as a raft. The frame for the top is 

designed for continual use with antennas, radar, and outriggers. The additional weight caused by 
larger items such as a raft may cause damage to the frame structure.

N O T I C E

A flush mount style transducer will not work with the inverted flat.

Summary of Contents for SAILFISH 282















































































Reviews:

No comments