13 Pilot’s manual for Nevada2
centre. When ordering new lines use the codes in the attached line diagram. Use the code ‘NVD2’ and
size of the glider, followed by the line code. E.g. the outside long line in row A for a Nevada2-28 is:
‘NVD2-28 A1.2’.
An exception to this is an emergency repair of brake line while out flying. For this purpose Gradient
encloses a spare line with every Nevada2 with a prepared loop on one end. To get the right length
adjust it according to the same line on the opposite side of the canopy. As soon as you can, change the
line for an original one from your authorised Gradient service centre.
After changing any line a thorough pre-flight check must be done. Don't hesitate to ask your instructor
or an experienced colleague for help. If you're not sure, entrust the job to either the manufacturer or
an authorised Gradient dealer.
If you have to replace any of the line-tidy rings (a spare rings are supplied with each Nevada2) check that
the lines haven't been swapped accidentally and that they are returned to the small karabiner in the
correct order.
