Risers .................. PAD 1,8/22 mm
Thread ................ PAV 9 PAD
Pulleys ............…. AustriAlpin, Riley
Carabiners ........... Maillon Rapide
∅
3.5 mm
3. CERTIFICATION
The Avax XC2 have in all sizes a new European certification EN.
The certification is valid for all harnesses of ABS type. This type of harnesses
enables a certain degree of adjustment to be made to the length of the waist strap.
42 cm is the recommended distance between the carabiners.
The following point applies to the Avax XC2 in common with all other paragliders.
When loosened cross-bracing is used the pilot's weight shift control is greater and
the glider is also more sensitive to the movements in the surrounding air. When the
cross-bracings are tighter, the pilot feels subjectively more stable but turning by
weight-shifting is practically ineffectual.
NOTICE: Paraglider Avax XC2 is constructed for hill or tow
launches. Use of subsidiary motor has not been tested for!
THIS GLIDER IS NOT MEANT FOR JUMPING FROM
A PLANE, BALLOON OR FOR JUMPS
WITH A BELATED OPENING OF THE CANOPY !
4. ADJUSTING YOUR GLIDER
Every Avax XC2 , before it is given to a customer, has a final check-up and test-
flight to verify that its characteristics and measurements correspond to the
manufacturer's specifications.
You may only make adjustments to the break line lengths or to the speed system
of your Avax XC2 and only then in keeping with the recommendations of this
manual.
Other adjustments or changes to your Avax XC2 lead to a loss of guarantee.
If you do have any suggestions on improvements let us know and our test-pilots
will try out your ideas without risk for yourself.