Be sure windows andd oors are
securely latched
in
open or closed position when operating. Replace
defective latches
and
weak
access cover support
struts
immediately.
SAFETY HIGHLIGHTS
Use boom tie-down device to secure boom
in
rack when traveling between jobsites.
Inspect brakes before driving carrier after
digging.
NOTE:
This illustration shows a typical automatic
slack adjuster. Refer to instructions provided on inside
back cover of this manual
Apply digging brake and stop engines.
Check the following for apparent damage:
Brake actuator chambers and rods
Brake actuator brackets
Slack adjusters
With brake applied, actuator rod should form an
approximate right angle with slack adjuster.
Do not drive unit
until any damage or mal-
function has been repaired.
Check to be sure
windows and mirrors
are clean
and that mirrors are properly adjusted for your driving
position and machine configuration. Ensure adequate
visibility for safe travel.
Whenever rotating equipment (such as a
mower or mixer) is installed on machine,
adequate shielding must be installed to
prevent flying debris.
Never operate such equipment with other
persons within range of possible flying
debris. Be certain that mower discharge
is never aimed at persons, equipment or
structures.
As an additional precaution, safety glass
and appropriate window guards must be
installed on machine.
•
•
•
7
DANGER
1.
2.
3.
4.