Technical Data
32
334179B
Technical Data
The vibration value has been measured in accordance with a standard test method and may
be used for comparing against electric tools and for preliminary assessment of exposure.
Hand-Held Sprayer
U.S.
Metric
Max Working Pressure
TrueCoat 360
1200 psi
8.3 MPa, 83 bar
TrueCoat 360 DS/DSP/VSP
1300 psi
9 MPa, 90 bar
Maximum Amperage
1.2 Amps
Weight
TrueCoat 360, 360 DS/DSP
3.5 lb (18 in.cord)
1.6 kg (45 cm cord)
TrueCoat 360 VSP
3.75 lb (18 in.cord)
1.7 kg (45 cm cord)
Dimensions:
Length
12.50 in.
31.75 cm
Width
5.25 in.
13.34 cm
Height 360, 360 DS/DSP
9.75 in.
24.77 cm
Height 360 VSP
11.8 in.
29.97 cm
Storage Temperature Range
32° to 113° F
0° to 45° C
Operating Temperature Range
40° to 90° F
4° to 32° C
Storage Humidity Range
0% to 95% relative humidity, non-condensing
Sound Pressure Level (Per ISO 3744)
75.8 dB(A) uncertainty K= 3 dB(A)
Sound Power Level (Per ISO 3744) #
86.8 dB(A) uncertainty K= 3 dB(A)
Vibration Level (
Measured in accordance
with EN60745-1)
3.41 ft/s
2
(uncertainty k=4.9 ft/s
2
1.04 m/s
2
(uncertainty K=1.5 m/s
2
Power Cord
18 AWG, 3-wire, 18 in.
2
1.0 mm
2
, 3-wire, 45 cm
Electrical Power Requirement
220 - 240Vac, 50 Hz, 10A, 1 phase
Duty Cycle
50%
Maximum tip orifice
0.015 in.
0.38mm
Pump damage will occur if fluid freezes in pump.
Damage to plastic parts may result if impact occurs in low temperature conditions.
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
#
Wear hearing protection.
VIBRATION HAZARD:
The vibration value during actual use of the sprayer
can differ from the declared value depending on the ways in which the tool
is used. To protect the operator from hand-arm vibration injury, identify
safety measures that are based on an estimation of exposure the actual
conditions of use. Take into account all parts of the operating cycle such as
the times when the tool is switched off, in addition to the trigger time.
