Operation
10
3A7382B
Operation
Setup
1. Turn the motor power switch (S) to OFF.
power cord into a dedicated 15 amp or 20 amp, 120
V circuit.
3. Check Throat Seal Liquid (TSL) level in packing nut
(D). Fill 1/2 full with TSL.
4. Attach hose to applicator fluid inlet and pump fluid
outlet (F), then secure Velcro straps (V) around the
cam lock fitting.
5. Flush the system with water before using (follow the
procedure on page 11).
To avoid tipping over, make sure the cart is on a flat
and level surface. Failure to do so could result in
injury or equipment damage.
WLD
S
WLD
'
WLD
&
)
9
