![background image](http://html1.mh-extra.com/html/graco/thermolazer-200/thermolazer-200_repair-manual_2251030022.webp)
Screed Box/Bead Dispenser Box Actuator
22
3A1320L
3. Reconnect clevis to deployment bar and again
rotate bead box wheel to see if adjustments cause
ThermoLazer to move forward and backwards.
4. Continue to rotate clevis 1/2 turn counterclockwise
until rotating bead box wheel causes ThermoLazer
to move forward and backwards.
5. Lock nut (128) to clevis when final adjustment has
been made.
NOTE:
Linkage rod (182): If converting from SmartDie
to SmartDie II, use Die Link Kit 24J714.
Screed Box/Bead
Dispenser Box Actuator
(ThermoLazer 300
TC
/ProMelt only)
If the screed box/bead dispenser box actuator does not
remain in the “down and locked” position, adjust the
3/4-16 lock nut by turning clockwise 1/4 to 1/2 turn or
until the actuator does not freely rotate.
Screed Box Pivot Arm
Loading
(ThermoLazer 300
TC
/ProMelt only)
Preload screed box pivot arm to ensure gate closes fully
before lifting screed box off the ground. If screed box
leaks when closing and lifting, increase loading.
1. Unhook bottom of box pivot arm spring (199).
2. Move bottom of box pivot arm spring to desired hole
and reconnect. Moving the spring in will decrease
loading, while moving the spring out will increase
loading.
128
179
268
78
ti14883a
ti14604a
ti14628b
ti14629b