Repair
309832D
23
Repair
Tools Used
Replacing hose
•
11/16 in. wrench
•
3/16 in. hex wrench
•
Phillips screw driver
•
1/8 in. hex wrench
•
1 in. wrench
•
Krytox
®
lubricant
•
5/16 in. socket wrench
•
3/32 in. hex wrench
•
Penetrating lubricant
•
7/16 in. wrench
•
5/8 in. wrench
•
Heat gun
WARNING
To avoid accidental system pressurization or
electrical shock, disconnect power cord and turn
the on/off switch to OFF. See
Warnings
, page 3.
WARNING
Wait until equipment/fluid has cooled completely.
Read
Warnings
, page 3.
WARNING
To prevent hose damage, do not flex hose when
cold. When hot, the hoses have a minimum bend
radius of 16 in. (40.64 cm)
115 VAC tanks can support up to two 16 ft (4.8
m) of total hose. 230 VAC tanks can support up
to two 24 ft (7.3 m) of total hose. Read
Warn-
ings
, page 3.
1.
Follow
Pressure relief procedure
, page 14.
2.
. 5. Turn on/off switch (R) OFF. Unplug tank
unit.