18
309711
Motor Replacement
Disassembly
1.
Relieve pressure
;
page 4.
2.
Remove pump (13);
Displacement Pump Re-
placement
, page 19.
CAUTION
Do not drop gear cluster (7) when removing drive
housing (10). Gear cluster may stay engaged in
motor front end bell or drive housing.
3.
Remove drive housing (10);
Drive Housing Re-
placement
, page 17.
4.
Remove four screws (18) and cover (39).
5.
Disconnect all leads from board (35). Remove five
screws (36) and board.
6.
Remove strain relief (37; Fig. 6) and motor fan (2).
7.
Remove three screws (22) behind board and
remove control housing (21).
8.
Remove four screws (22) and motor (1) from
frame (63).
Assembly
1.
Install new motor (1) on frame (63) with four
screws (22).
2.
Install control housing (21) with three screws (22).
3.
Install strain relief (37; Fig. 6) and motor
fan (2).
4.
Install board (35) with five screws (36). Connect all
leads to board (35).
5.
Install drive housing (10);
Drive Housing Re-
placement
, page 17.
6.
Install pump (13);
Displacement Pump Replace-
ment
, page 19.
ti3351a
ti0054b
Fig. 9
22
1
1
Liberally apply grease
39
1
18
36
35
22
1
63
