30
1.
MAKE SURE
vehicle is on level ground. Make sure to check your
vehicle owner's manual for
LATCH
seating
positions.
2. For ease of installation, press button to extend
LATCH
to its
MAXIMUM LENGTH
.
3. Position base in vehicle seat as shown.
4. Make sure
LATCH
is through vehicle/
LATCH
belt path normally used for vehicle seat belt.
.
Belt must lie flat and not be twisted.
5.
Attach
connectors
to vehicle lower anchors.
Pull firmly on
connectors
to be sure they
are attached
.
6. Tighten
LATCH
by pushing down hard on
base and pulling the adjustment belt back
through belt path
.
6.3 Using LATCH to Install Base
CLICK!
Summary of Contents for SnugRide Click Connect 35
Page 37: ...SnugRide Click Connect 35 2012 Graco PD213671B 11 12 US ...
Page 83: ...47 Notes ...
Page 85: ...SnugRide Click Connect 35 2012 Graco PD213671B 11 12 US ...
Page 131: ...47 Notas ...