Installation
313431H
11
c.
Pump solvent through line until fluid runs clear
and is debris free.
d.
Pump lubricant through line until all solvent is
flushed out.
7.
For enclosed channel installations, continue with
instructions on page 19. For all other installations,
continue Step 8.
8.
Position hose stop so hose extends far enough for
all operators to reach dispensing valve and tighten
nuts to securely hold hose stop in place.
9.
Install meter or dispense valve to end of hose follow-
ing instructions provided with the dispense equip-
ment. (NOTE: If installing an enclosure around hose
reel, install the enclosure before installing dispense
valve or meter to hose end.)
10. Adjust spring tension, page 17.
Summary of Contents for SD Composite HR
Page 41: ...NOTES 313431H 41 NOTES...
