Graco SD Composite HR, Instructions Manual

Page: 19 / 42

Installation
313431H 19
Hose Reel Enclosure Installation (see F
IG
. 16, page 21)
NOTE:
• For each reel : order 1 Enclosed Mounting Channel kit and 1 Side Panel kit.
• For each reel bank : order 1 End Panel kit.
• Before installing the Hose Reel Enclosure, you must install the hose on the reel and adjust the spring’s tension.
1. Bolt reel base to mounting channel.
2. Slide hose reel into the reel base (302). Install the
hold-down plate (303), washer (305) and capscrew
(304) as shown in F
IG
. 16. Tighten the screw firmly.
HR or HP Models: Enclosed Mounting Channel Kits
FN Description
203521
1 Reel
203522
2 Reels
203523
3 Reels
203524
4 Reels
203525
5 Reels
203526
6 Reels
102
SCREW, 3/8” - 16 x
5/8”
4 8 12 16 20 24
103 WASHER, lock, 3/8” 4 8 12 16 20 24
105 CHANNEL, mounting 1 1 1 1 1 1
HR or HP Models: Side Panel Kits
Part Number - Reel Size
Color
FN Description
24A217 - 10
24A218 - 20
White
24A940 - 10
24A945 - 20
Metallic Blue
24A941- 10
24A946 - 20
Red
24A942 - 10
24A947 - 20
Black
24A943 - 10
24A948 - 20
Mercedes Blue
24A944 - 10
24A949 - 20
Yellow
301 SCREW, M6 x 1.0 x 20 4 4 4 4 4 4
302 BASE, reel, enclosed, black 1 1 1 1 1 1
303 PLATE, hold down 1 1 1 1 1 1
304 SCREW, 3/8” -16 x 5/8” 5 5 5 5 5 5
305 WASHER, lock, 3/8” 5 5 5 5 5 5
306 SCREW, thumb, 3/8” - 16 x 1/2” 4 4 4 4 4 4
307 PANEL, side 1 1 1 1 1 1
308 PANEL, side 1 1 1 1 1 1
309 SCREW, #10 - 24 x 5/8” 2 2 2 2 2 2
310 NUT, spring 2 2 2 2 2 2
HR or HP Models: End Panel Kits
FN Description
24A950 - 10
24A951 - 20
401 NUT,spring 12
402 SCREW, 10 - 24 x 5/8” 12
403 PANEL, end 2
404 LABEL, Graco logo 2