Maintenance
24
3A7653D
Maintenance
Routine maintenance is important to ensure proper operation of your sprayer.
NOTICE
Airless Hoses
Check Airless Hose for damage every time
you spray. Do not attempt to repair Airless
Hose if hose jacket or fittings are damaged.
Do not use Airless Hoses shorter than 25 ft.
Wrench tighten, using two wrenches.
Spray Tips
•
Always clean tips with water and brush
after spraying.
•
Tips may require replacement after 15
gallons or they may last through 60
gallons.
Pump Repair
When pump packings wear, material will
begin to leak down outside of pump.
Purchase a Pump Cartridge Kit or
replacement Pump Assembly. See
Parts
,
Install pump according to
instructions, pages 24 and 25.
Pump Removal
The Hopper must be removed before pump
can be removed.
Always perform
page 12, before starting any pump repairs.
1
3
ti27463a
2
1.
Pull tabs on sides of the Easy Access
Door pump towards you while pushing
the entire door away from the inlet end of
the pump.
2.
Now lift the door so that it swivels out of
the way.
Activity
Interval
Inspect/clean Fluid Inlet strainer.
Daily or each time you spray
Inspect motor shroud openings for blockage.
Daily or each time you spray
Protect the internal drive parts of this
sprayer from water.
Openings in shroud
allow cooling of mechanical parts and
electronics inside. If water gets into these
openings, the sprayer could malfunction or
be permanently damaged.