Graco SaniSpray HP 65, Operation - Repair - Parts, Page: 23 / 40

Storage
3A7653D 23
Quick Reference
Page 9 Name Description
A Prime/Spray Valve
•
In PRIME position directs fluid to Drain Tube.
•
In SPRAY position directs pressurized fluid to
Airless Hose.
•
Automatically relieves system pressure in
overpressure situations.
B PushPrime Button Taps the inlet ball when pushed to loosen it.
C Pressure Control Knob Increases (clockwise) and decreases
(counterclockwise) fluid pressure in pump, Airless
Hose, and Spray Gun.
D ON/OFF Switch Turns sprayer ON and OFF.
E Hopper Draws fluid into pump.
F Drain Tube Drains fluid in system during priming and pressure
relief.
G SaniSpray HP Airless Spray
Gun
Dispenses fluid.
H Spray Tip
•
Atomizes fluid being sprayed, forms spray pattern
and controls fluid flow according to hole size.
•
Reverse position unclogs plugged tips without
disassembly.
J Spray Tip Guard Reduces risk of fluid injection injury.
K Trigger Lock (page 13) Prevents accidental triggering of Spray Gun.
L Fluid Inlet Fitting Threaded connection for Airless Hose.
N ProXChange Pump Pumps and pressurizes fluid and delivers it to
Airless Hose.
P Pump Fluid Outlet Fitting Threaded connection for Airless Hose.
Q Airless Hose Transports high-pressure fluid from pump to Spray
Gun.
T Inlet Strainer (inside Hopper) Prevents debris from entering pump.
U Power Cord Plugs into power source.
V Easy Access Door Easy Access Door permits quick access to the
pump. Open pump door by pulling out on the tabs
while sliding door away from the pump inlet.
X Pump Removal Tool Use cut out in the frame to remove/install pump
packing.
Z Inlet Valve Removal Tool Cut out in the frame provide the tools to quickly
remove/install the inlet valve without additional tools.