Graco SaniForce FW1111, Instructions Manual

Page: 33 / 34

Performance Chart
3A4238B 33
Performance Chart
Test Conditions: Pump tested in water with inlet submerged
Fluid Pressure Curves
A at 120 psi (0.7 MPa, 7 bar) operating air pressure
B at 100 psi (0.7 MPa, 7 bar) operating air pressure
C at 70 psi (0.48 MPa, 4.8 bar) operating air pressure
D at 40 psi (0.28 MPa, 2.8 bar) operating air pressure
To find Fluid Outlet Pressure
(psi/MPa/bar) at a specific fluid flow (gpm/lpm) and
operating air pressure (psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Follow vertical line up to intersection with selected
operating air pressure curve.
3. Follow left to scale to read fluid outlet pressure.
Air Consumption Curves
A at 120 psi (0.7 MPa, 7 bar) operating air pressure
B at 100 psi (0.7 MPa, 7 bar) operating air pressure
C at 70 psi (0.48 MPa, 4.8 bar) operating air pres-
sure
D at 40 psi (0.28 MPa, 2.8 bar) operating air pres-
sure
To find Pump Air Consumption
(scfm or m
3
/min) at a specific fluid flow (gpm/lpm) and
operating air pressure (psi/MPa/bar):
1. Locate fluid flow rate along bottom of chart.
2. Read vertical line up to intersection with selected
operating air pressure curve.
5
10 15
20
25 30 35
40
20
40
60
80
100
120
Fl
uid
O
u
tl
et
Pres
s
u
re
Fluid Flow
0
(0.84, 8.4)
(0.7, 7)
(0.55, 5.5)
(0.41, 4.1)
(0.28, 2.8)
(0.14, 1.4)
(19)
(38) (57)
(76)
(95) (114) (133)
(152)
20
40
60
0
(1.7)
(1.13)
(0.57)
5 10 15 20 25 30 35
40
(19)
(38) (57)
(76)
(95) (114) (133)
(152)
A
ir Co
ns
ump
tio
n
ps
i (M
P
a
, ba
r)
gpm (lpm)
Fluid Flow
gpm (lpm)
scf
m (m
3
/m
in
)
TI8736A
TI8742A
TI8737A
TI8742A