Integrated Air Controls
6
3A5800C
Replace Ram Air Regulator
Numbers in parentheses refer to Parts, page 7.
1.
Disassemble the air control. See Disassembly,
page 4.
2.
Remove four screws (7a) and take off the ram air
regulator (7).
3.
Replace o-rings (7b) on back side of regulator.
4.
Attach new air regulator to manifold. Use index pin
for correct orientation. Tighten screws until snug.
Reassembly
1.
Using four screws and washers, attach the inte-
grated air controls to the mounting bracket. See F
2.
Attach the ram up, ram down, and blowoff air lines
as shown in Figure F
3.
Attach all other hoses and replace shrouds.
4.
If replacing entire control assembly, install the
safety relief valve (BI) from previous control assem-
bly.
F
IG
. 3
Ram down
Ram up
Blowoff
ti10778a
Auxiliary
air supply port
(BI) safety
relief port
