Repair
34
3A6884B
4-Way Valve Replacement
Tools Required:
Phillips screwdriver, 5 mm
Allen wrench, 10 mm wrench.
Remove 4-Way Valve
1.
page 10 and disconnect power to the
TSP power pack.
2.
Remove top half of frame and shroud.
3.
Using a Phillips screwdriver, fully loosen
retainer screw. Pull plug off from the
valve.
4.
Remove finger-tight nut on top of valve.
Remove coil from valve.
5.
Use a 5 mm Allen wrench to remove the
four M6 screws that secure the 4-Way
Valve to the diverter block. Remove the
4-way valve. Save the M6 screws for
reuse later.
