![background image](http://html.mh-extra.com/html/graco/reactor-3-e-20-pro/reactor-3-e-20-pro_operation_2250953045.webp)
Proportioner
Proportioner
Proportioner Control
Control
Control Panel
Panel
Panel
This Proportioner Control panel contains
controls for operation of the proportioner pump.
Icon
Icon
Icon
Name
Name
Name
Description
Description
Description
Propor-
tioner Pump
Pressure
Setpoint
Tap +/– to adjust the
setpoint by ten psi. Press
and hold +/– to slew.
Tap the number to open
pop-up and type in
setpoint directly.
Propor-
tioner Pump
Jog Level
Tap +/– to adjust the
jog level by one. Press
and hold +/- to slew.
Tap the number to open
pop-up and type in jog
level directly.
Propor-
tioner Pump
Modes
Tap to select the
proportioner pump mode.
Spray
Spray
Spray ::: used to pressurize
and spray material. Pump
drives to pressure setpoint.
Jog:
Jog:
Jog:
used to
recirculate/flush material.
Pump drives to jog level.
Park:
Park:
Park: used to park the
electric transfer pumps
and proportioner pump.
Parking is done to
increase seal life on
the proportioner pump
and ease ProConnect for
the electric tranfer pumps
(if present).
NOTE:
NOTE:
NOTE: The park operation
will start when entering
Park mode from any other
mode. The park icon
will flash red while park
operation is in progress.
Parked:
Parked:
Parked: indicates a park
operation has completed
successfully.
Propor-
tioner Pump
On/Off
Tap to toggle the
proportioner pump state.
Diagnostic
Diagnostic
Diagnostic Screen
Screen
Screen
Use the Diagnostic screen to view information
for all system components.
Icon
Icon
Icon
Name
Name
Name
Description
Description
Description
General
System Data
Tap to display general
system information related to
heat/pressure/flow.
Heat Data
Tap to display more detailed
information related to heat.
Pressure /
Flow Data
Tap to display more detailed
information related to pressure
/ flow.
Override ISO
Lube Pump
Press to force the ISO lube
pump to run.
NOTE:
NOTE:
NOTE: Button is momentary
(must press and hold to run
pump).
Electric
Transfer
Pump Data
Tap to display more detailed
information related to electric
transfer pumps.
NOTE:
NOTE:
NOTE: This page is only
displayed if at least one
electric transfer pump is
installed on the system.
Engine Data
Tap to display more detailed
information related to engine.
NOTE:
NOTE:
NOTE: This page is only
displayed if an active
connection is present between
the MCM port 13 and an engine
with a J1939 communication
port.
3A8500E
45