6ą307-878
INSTALLATION
Air Line Accessories
See page 8 for recommended air accessories and
installation.
Models 225–773 & 225–827
1.
Model 225–773 only: Assemble the truck as shown in
the parts drawing on page 11. Secure the truck pail
(5) to the truck base with the pointed hold down
clamps (3c) and thumbnuts (3d).
All models:
2.
Screw the holster (6) into the pump outlet.
3.
Remove the cover from the pail of lubricant. Place
the pail of lubricant into the truck pail (5).
4.
Secure the cover (4) on the pail with the three thumb-
screws (A).
5.
Insert the pump riser tube through the top of the
cover (4). Lower the pump until it rests on the cover.
6.
Assemble the gun (2b) and hose (2a), and then con-
nect the hose to the pump fluid outlet.
7.
Connect the nipple (2d) to the pump air inlet. Connect
the quick disconnect coupler (2c) to the air supply
hose.
Model 225–003 & 226–379
1.
Assemble the base (3) as shown in the parts drawing
on page 12.
2.
Screw the holster (6) into the pump outlet.
3.
Place the pail of lubricant on the base.
4.
Remove the cover from the pail and scoop the lubri-
cant from the center to the sides of the pail to make its
surface concave.
5.
Center the follow plate (5) in the pail opening. Press
the plate firmly downward and rotate it over the lubri-
cant surface to eliminate air pockets and prevent
channeling.
6.
Place the shield (4) over the pail. Secure the shield to
the base with the clamps (3c) and thumbnuts (3d).
7.
Assemble the gun and hose, and then connect the
hose (2a) to the pump fluid outlet.
8.
Connect the nipple (2b) to the pump air inlet. Connect
the quick disconnect coupler (2c) to the air supply
hose.
2c, 2d
4
5
3c, 3d
6
2b
2a
A
2c, 2d
6
2b
2a
3c, 3d
4
5
3
Summary of Contents for Ratio Fire-Ball 225-003
Page 2: ......
