![background image](http://html1.mh-extra.com/html/graco/promix-2ks/promix-2ks_operation-manuals_2251152049.webp)
System Operation
312776K
49
5.
The components are pre-mixed in the integrator,
then uniformly blended in the static mixer (SM).
NOTE:
To control output from the static mixer to the
gun, install an optional fluid pressure regulator.
6.
Components A and B are alternately fed into the
integrator as long as the gun is triggered.
7.
If the gun is not triggered for two minutes, the sys-
tem switches to Idle mode, which closes off the mix
manifold dose valves.
8.
When the gun is triggered again, the ProMix 2KS
continues the process where it left off.
NOTE:
Operation can be stopped at any time by
pressing the Standby
key or shutting off the
main power switch.
Table 5: Sequential Dosing Operation
Ratio = 2.0:1
Dose 1
Dose 2
Dose 3
A = 2
B = 1
F
IG
. 51. Wall Mount Fluid Station, Sequential Dosing
TI12556b
MA
MB
DVB
MS
SPV
DVA
APV
SM
FI
SVA
SVB
RVB
RVA
Key:
MA
Component A Meter
DVA Component A Dose Valve
RVA Component A Sampling Valve
SVA Component A Shutoff Valve
MB
Component B Meter
DVB Component B Dose Valve
RVB Component B Sampling Valve
SVB Component B Shutoff Valve
MS
Solvent Meter (accessory)
SPV Solvent Purge Valve
APV Air Purge Valve
SM
Static Mixer
FI
Fluid Integrator
AT
Air Purge Valve Air Supply Tube
AT