Installation
Installation
Installation
Mount
Mount
Mount the
the
the Controller
Controller
Controller
To reduce the risk of fire or explosion, do not install
equipment approved only for a non-hazardous
location in a hazardous location.
Note
The air controller can be mounted on the
control box stand or on a wall. The box
comes with four mounting brackets installed
in a vertical orientation. Remove and turn
the brackets if a horizontal orientation works
better for your installation.
Wall
Wall
Wall Mounting
Mounting
Mounting
The pre-installed mounting brackets can be used to
mount the controller on any flat wall. Mount the air
controller in the non-hazardous area, as close to the
applicator as possible, to minimize pressure loss in
the air lines.
1.
Determine the mounting location. Ensure that
the wall is strong enough to support the weight
of the mounting bracket and the controller. See
Technical Specifications, page 41
2.
See the dimensions or use the box as a template
to mark the mounting hole locations.
3.
Drill holes and use four screws to attach the
controller to the wall.
Electronic
Electronic
Electronic Air
Air
Air Controller
Controller
Controller
3A3954D
9
