308393 15
Operation
Model 112635 – Using the Hose Wash
1.
Place the hose entirely inside the gun washer.
2.
Connect one end of the hose to the Hose Wash
Bulkhead fitting. See Fig. 4.
Fig. 4
Hose Wash Bulkhead
3.
Turn the hose/gun wash selector to HOSE WASH.
NOTE: When the selector is set for Hose Wash,
the solvent is routed through the hose wash bulk-
head fitting instead of the gun supports and spray
nozzles.
Model 117438 – Using the Hose Wash
1.
Remove the brass plugs from the Hose Wash
Bulkhead. See Fig. 5.
Fig. 5
Hose Wash Bulkhead
Hose Wash
Bulkhead
2.
Install a female fluid quick coupler with 1/4 in. npt
male threads (suitable for lacquer thinner) into the
Hose Wash Bulkheads.
3.
Connect the paint line to the couplers.
4.
Set the pointer on the shield to hose clean and
operate the gun washer.
NOTE: When the selector is set for Hose Wash,
the solvent is routed through the Hose Wash Bulk-
head fitting instead of the gun supports and spray
nozzles.
