Graco PrecisionFlo 233678, Instructions-Parts List Manual

Page: 19 / 20

309384
19
Technical Data
Category Data
Maximum Fluid Working Pressure 3500 psi (24 MPa, 240 bar)
Fluid Inlet and Outlet 3/8–18 npt
Weight 18 lbs. (8.16 kg)
Wetted Parts 303 stainless steel (SST), tungsten carbide,
chrome-plated 17–4 PH SST, 15–5 PH SST, braze, cast
polyurethane, buna-n, PTFE
Fluid Specifications For use when dispensing fluids that meet at least one of
the following conditions for non-flammability:
D
The fluid has a flash point above 140
_
F (60
_
C) and
a maximum organic solvent concentration of 20%,
by weight, per ASTM Standard D93.
D
The fluid does not sustain burning when tested per
ASTM Standard D4206 Sustained Burn Test.
Fluid Viscosity: 10,000 cps to 1,000,000 cps*
Maximum Fluid Temperature: 176
_
F (80
_
C)
* Flow rate is dependent upon material viscosity, tip size and supply pressure.
Related Publications
Product Form#
PrecisionFlo Module 308540
PrecisionFlo Control Assembly 310531
PrecisionFlo
t
and PrecisionFlo
t
Plus are trademarks of Graco, Inc.