Warnings
4
312798J
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
•
Ground equipment, personnel, object being sprayed, and conductive objects in work area. See
Grounding instructions.
•
Only use grounded Graco conductive air supply hoses.
•
Use and clean equipment only in well ventilated area.
•
Use cleaning solvents with highest possible flash point when flushing or cleaning equipment.
•
Always turn the electrostatics off when flushing, cleaning or servicing equipment.
•
If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
•
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
•
Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
•
Keep work area free of debris, including solvent, rags and gasoline.
•
Check gun resistance daily.
•
Keep a working fire extinguisher in the work area.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric
shock.
•
Turn off air supply before servicing equipment.
•
All electrical wiring must be done by a qualified electrician and comply with all local codes and
regulations.
•
Do not touch gun electrode when electrostatics are on.
•
Do not expose to rain. Store indoors.
SKIN INJECTION HAZARD
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.
•
Do not spray without tip guard and trigger guard installed.
•
Engage trigger lock when not spraying.
•
Do not point gun at anyone or at any part of the body.
•
Do not put your hand over the spray tip.
•
Do not stop or deflect leaks with your hand, body, glove, or rag.
•
Follow the Pressure Relief Procedure when you stop spraying and before cleaning, checking, or
servicing equipment.
•
Tighten all fluid connections before operating the equipment.
•
Check hoses and couplings daily. Replace worn or damaged parts immediately.
WARNING
WARNING
WARNING
WARNING
