Registering the PAC
6
312417F
Manual Override (A)
The Manual Override Switch turns on air to the pump
and allows you to prime the system without power.
1.
Insert a small, flat screwdriver in slot of Manual
Override Switch screw (A).
2.
Rotate Manual Override Switch screw (A) clockwise
approximately 1/4 turn.
3.
Before you can resume normal PAC communication
with Matrix you must reset the Manual Override
Switch screw (A) to the normal operation position.
To to this, insert small, flat screwdriver in the slotted
opening and turn the Manual Override Switch screw
(A) counter-clockwise approximately 1/4 turn back
to the original position.
F
IG
. 3
NOTICE
Do not turn Manual Override Switch screw (A) more
than 1/4 turn. Overturning this screw could cause it to
come out; rendering the unit inoperable.
A