Assembly Procedure
3A2334A
7
Assembly Procedure
1.
Place the piston valve (5) in a soft jaw vise and
return the ball (8a) and spring (3). Thread in indica-
tor port adapter (9) and torque to 12 ft-lbs (16 N•m).
2.
Remove the piston valve (5) from vise.
3.
Place the pump body (10) in a soft jaw vise with
flange end facing down.
4.
Thread in
piston valve (5), being careful not to cut
the o-rings.
5.
Apply a small amount of pipe sealant to pipe plug
(8h or 8j) and, while holding indicator port adapter
(9) with a wrench, tighten the pipe plug (8h).
6.
Remove pump body (10) from the vise and turn so
that the flange end faces up.
7.
Replace piston return spring (4).
8.
Assemble the retainer ring (8c or 8f) and retainer
spring (1) on the piston.
9.
Lightly oil piston and insert into piston valve (5).
10. Insert the piston guide (6) and depress slightly to
allow the self-locking ring (8e) to be installed.
Summary of Contents for Manzel MVB 563565
Page 11: ...Notes 3A2334A 11 Notes...
