Repair
3A3169E
21
j.
Install clip (9) (F
. 41). You should hear a “click”
when the retaining clip is correctly seated in the
groove.
4.
Reposition the pump base (1) in the vise as shown
in F
. 42.
5.
Pump Element Sleeve (53)
a.
Use a clean cloth to wipe down the pump ele-
ment sleeve (53) and remove any dirt or con-
taminants. Inspect surface for any scratches or
damage.
b.
Apply a thin layer of grease to o-ring (14). Install
o-ring around the pump element sleeve (d) (F
43).
c.
Install the pump element sleeve (53) in the
pump base (1). To determine the correct instal-
lation orientation, refer to F
NOTE:
When the sleeve is installed in the pump
base correctly, the notches
(n)
around the bot-
tom of the sleeve will go into the pump base first
and the o-ring will be on the top.
F
IG
. 41
F
IG
. 42
9
F
IG
. 43
53
14
