Pressure Relief Procedure
6
332252A
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
1.
Turn power
OFF.
Wait 7 seconds for power
to dissipate.
2.
Lock gun trigger safety.
3.
Remove guard and SwitchTip.
4.
Turn pressure to lowest setting. Trigger gun to
relieve pressure.
5.
Put drain tube in pail.
6.
Turn prime valve down to DRAIN position.
7.
If you suspect the spray tip or hose is clogged or
that pressure has not been fully relieved after follow-
ing the steps above, VERY SLOWLY loosen tip
guard retaining nut or hose end coupling to relieve
pressure gradually, then loosen completely. Clear
hose or tip obstruction.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief Pro-
cedure when you stop spraying and before cleaning,
checking, or servicing the equipment.
ti13055a
ti13131a
ti2769a
ti21125a
ti2595a
ti13026a
