Operation
4
309495L
Operation
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
1.
Turn sprayer
OFF
.
2.
Engage the trigger lock. Always engage
the trigger lock when sprayer is stopped
to prevent the gun from being triggered
accidentally.
3.
Turn pressure control knob to lowest
setting.
4.
Put drain tube into a waste pail and turn
Prime/Spray valve in PRIME position
(drain) to relieve pressure.
5.
Hold the gun firmly to a pail. Point gun
into pail. Disengage the trigger lock and
trigger the gun to relieve pressure.
6.
Engage the trigger lock.
7.
If you suspect the spray tip or hose is
clogged or that pressure has not been
fully relieved:
a.
VERY SLOWLY loosen the tip
guard retaining nut or the hose end
coupling to relieve pressure
gradually.
b.
Loosen the nut or coupling
completely.
c.
Clear airless hose or spray tip
obstruction. See
Gun Trigger Lock
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized fluid,
such as skin injection or splashed fluid, follow
the
Pressure Relief Procedure
whenever
sprayer is stopped and before sprayer is
cleaned or checked, and before equipment is
serviced.
ti29239a
To prevent injury when the gun is not in
use, always engage the gun’s trigger lock
if unit is being shut down or left
unattended.
ti29240a
