![background image](http://html.mh-extra.com/html/graco/hydroshield-wabh00/hydroshield-wabh00_instructions-parts-manual_2251562035.webp)
Adjust
Adjust
Adjust the
the
the Gun
Gun
Gun Fluid
Fluid
Fluid Settings
Settings
Settings
Preset 0 allows operators to change the gun fluid
pressure at any time. Preset 0 assumes a manual
purge profile.
Use Preset 1 through 99 to configure different
gun fluid pressure settings and a purge profile
number. To set up a purge profile, see
For example, Preset 1 might use the best pressure
settings for black paint, Preset 02 might use the best
pressure settings for red paint, and Preset 99 might
be set to a higher fluid pressure to perform a quicker
flush.
For instructions on creating presets, see
. Refer to the gun setup procedure
in your gun manual to select the best gun fluid
settings.
To
To
To use
use
use Preset
Preset
Preset 0
0
0
Preset 0 can be changed by the operator at any time
during operation.
1.
Press the right arrow
until Home appears
on the menu bar.
2.
Press the Enter Screen button
to enter the
screen to edit the current settings.
3.
Use the down arrow
to navigate to the Fluid
field.
4.
Press the numbers on the keypad to the desired
psi value.
5.
Press the Enter button
to register the value.
The interface automatically advances to the
Preset field.
6.
Press the Exit Screen button
to exit the
screen settings.
Note
If an operator is in Preset 1–99, and then
switches to Preset 0, Preset 0 will reflect the
previous settings.
To
To
To use
use
use Preset
Preset
Preset 1
1
1 through
through
through 99:
99:
99:
1.
Press the right arrow
until Home appears
on the menu bar.
2.
Press the Enter Screen button
to enter the
screen to edit the current settings.
3.
Use the up and down arrows
to navigate
to the Preset field.
4.
Enter the Preset number that you would like to
use.
5.
Press the Enter button
to register the value.
6.
Press the Exit Screen button
.
Shutdown
Shutdown
Shutdown
1.
Discharge the system voltage. Follow the
Fluid Voltage Discharge and Grounding
Procedure, page 29
2.
Flush the gun. See
(Systems without Color Change), page 31
or
Flush the System (Color Change Enabled
Systems), page 32
.
3.
Follow the
Pressure Relief Procedure, page 30
.
4.
Press the Stop button
on the control
interface to change to Off mode.
3A8492A
35