Instructions–Parts List
307619ZAA
ENG
HYDRA–SPRAY
R
Monark
r
and President
r
Pumps
For airless and air–assisted spraying of finishing materials.
For professional use only.
Important Safety Instructions
Read all warnings and instructions in this manual. Save
these instructions.
See page 2 for Table of Contents
Part No. 223596, Series B 23:1 Ratio Monark
r
Pump
with Part No. 223595 carbon steel severe–duty displacement pump*
with stainless steel glands, intake housing, piston valve, and ball stop
2760 psi (19 MPa, 190 bar) Maximum Fluid Working Pressure
120 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure
Part No. 237958, Series B 23:1 Ratio Monark
r
Pump
with Part No. 239145 stainless steel
severe–duty displacement pump*
3450 psi (24 MPa, 238 bar) Maximum Fluid Working Pressure
150 psi (1.0 MPa, 10.4 bar) Maximum Air Input Pressure
Part No. 239140, Series A 46:1 Ratio President
r
Pump
with Part No. 239145 stainless steel
severe–duty displacement pump*
4600 psi (32 MPa, 317 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure
*
Severe–duty displacement pumps have abrasion–resistant
displacement rods and sleeves. Refer to Technical Data on
page 20 for information on the wetted parts.
Model 239140
06936
Model 223596
02097
II 1/2 G T3
ITS03ATEX11228
II 1/2 G T3
ITS03ATEX11228
II 2 G T6
Summary of Contents for HYDRA-SPRAY Monark 223596
Page 22: ...22 307619 Notes...
