Graco HVLP-Turbine Gun, Instructions-Parts List Manual

Page: 9 / 26

Setup
309205R 9
Preparing to Spray
Paint Reduction - Industrial or Domestic
Coatings
Reduce and catalyze all paint to manufacturers’s specifi-
cations. If not reductions are given, first thoroughly mix
fluid to be sprayed. Gradually mix in reducer, testing
fluid for correct spraying consistency.
Test consistency, remove stir stick from thinned paint.
Consistency is right when first drops from stir stick are
about one second apart.
Prepare the Surface
To achieve proper adhesion, make sure the surface to
be sprayed is completely clean.
Turbine Spray Unit
(for more information see manual 309241)
Connect Fluid and Air Supply
Notes:
• The HVLP Cart/Compressor provides the air supply
for the remote pressure pot.
• Circled letters in Fig. 12 indicate hose line connec-
tions.
1 Connect gun air supply hose (A) between turbine air
outlet (B) and gun air inlet (C). DO NOT use wrench
to tighten connections; hand tighten only. Fig. 12.
2 If using a spray gun cup (D): Connect cup to gun
fluid inlet (E).
If using accessory remote pressure pots (F): Con-
nect fluid supply hose (G) between remote pressure
pot fluid outlet (H) and gun fluid inlet (E), or connect
pressure pot air hose (J) between pressure pot air
regulator inlet (K) and the cart compressor air outlet
(L).
F
IG
. 12
"
,
:
8
#
$
*
!
'
'
#
!
%
%
(
&
+
8
8
9
9
:
GALLONREMOTEPRESSUREPOT
CUPSETUP
FORSPRAYGUN
!
:
9
*
+ ( '
&
TO
COMPRESSOR
QUARTREMOTEPRESSUREPOT
TIA