Graco HVLP-Turbine Gun, Instructions-Parts List Manual

Page: 15 / 26

Maintenance
309205R 15
8 Trigger gun while hand tightening fluid nozzle (14a).
9 Install air cap (15) and retaining ring (13).
10 Dampen a soft cloth with solvent. Wring out the
excess. Point gun down and wipe off outside of gun.
Fig. 21.
F
IG
. 21
11 Lubricate gun after cleaning it as instructed on page
17.
TI0818
CAUTION
Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method that
may allow solvent into gun air passages.
TI0818
07041A
02027
02055
Do not point gun up
Do not immerse gun
Do not wipe gun with
solvent; ring out excess.
Do not use metal tools
This may scratch them.
spray pattern.
while cleaning it.
in solvent.
a cloth soaked in
to clean air cap holes.
Scratches can distort