Accessories
Use Only Genuine Graco Parts and Accessories
Mounting Stand Kit 218–742
For mounting the surge tank
to the floor.
Pump Floor Stand 220–581
For mounting medium volume
High-Flo pumps in a
suction feed system.
Refer to the Medium Volume
High-Flo Accessories Manual,
307–837.
Stationary Stand 207–872
For President, Bulldog, and Senator Pumps.
Wall Bracket 206–221
For mounting medium volume High-Flo pump to a wall.
Portable Cart 218–028
For President, Bulldog, and Senator Pumps.
Packing Nut Wrench 110–335
For tightening the packing nut.
Throat Seal Liquid (TSL)
Non-evaporating liquid for packing nut/wet-cup.
206–995
0.95 liter (1 quart)
206–996
3.8 liter (1 gal.)
Graco-Approved Hydraulic Fluid
169–236
20 liter (5 gal.)
207–428
3.8 liter (1 gal.)
Hydraulic Shutoff Valve 102–644
For hydraulic supply or return line. 3/4 npt(f).
Hydraulic Supply and Return Hose
10.5 MPa, 105 bar (1500 psi) Maximum Working
Pressure
5/8 in. ID, coupled 3/4 npt x 7/8–14, 90
swivel elbow,
grounded, for return line.
180–091
0.9 m (3 ft) long
180–092
1.8 m (6 ft) long
13.8 MPa, 138 bar (2000 psi) Maximum Working
Pressure
1/2 in. ID, coupled 1/2 npt(m) x 3/4–16, 90
swivel
elbow, grounded, for supply line.
180–090
0.9 m (3 ft) long
180–093
1.8 m (6 ft) long
Pump Mounting Adapter Kits
Provides adapter plate and tie rods for retrofitting
existing motor to a High-Flo displacement pump. Refer
to Medium Volume High-Flo Accessories Manual
307–837.
220–579
For Series A, B, C, or D Bulldog Mo-
tors, Part No. 208–356, and Series A
Senator Motor, Part No. 217–540.
More recent series of these motors do
not require this kit.
221–159
Required for all Viscount I and Presi-
dent Motors.
Siphon Tube Kit 213–099
To draw fluid from a 200 liter
(55 gallon) drum.
