Graco HEH006, Installation, Repair, And Parts, Page: 19 / 26

Repair
3A8216B 19
Replace the Swivel Seal
(Kits Listed on page 22)
1. Follow the Pressure Relief Procedure , page 8.
2. Remove the outmost snap ring (1).
3. Remove the inlet shaft assembly (2).
4. Remove the inside snap ring (1)
5. Remove the retainer (3).
6. Remove the backup ring (4).
7. Remove the swivel seal (5).
8. Replace the swivel seal (5) with the new one from
the kit.
9. Replace the backup ring (4) with the new ring from
the kit.
10. Replace the retainer (3).
11. Replace the inside snap ring (1) with the new one
from the kit.
12. Lubricate the inlet shaft assembly (2) and replace.
13. Replace the outmost snap ring (1) with the new one
from the kit.
NOTE: For high pressure models, make sure that the
two snap rings in the same groove are aligned with each
other.
14. Hand rotate the shaft until free.