Graco G3 SP Series, Instructions Manual

Page: 12 / 48

Installation
12 3A4676B
Alarm Output and Remote Illumination Response
The following tables include graphical representations of the connector as it appears on the unit, a pin-out associated
with the connector and a typical installation wiring diagram. An internal representative wiring diagram is included
where it is deemed useful.
Wire colors provided on these pages only refer to the power cable provided by Graco with this product.

Stays on only for Low Level fault condition.
Wiring and Installation Diagrams
The following Table identifies the wiring and installation diagrams provided in this manual.
Outputs
(via 5 wire CPC power cable)
Pin 4
Alarm
Pin 7
Low Level
Unit in OFF Mode Off Off
Unit in ON Mode Off Off
Warning Condition Off Off
Low Level Indication
(Advanced Programming Setting A9 OFF)
Off Activated (On)
Low Level Indication
(Advanced Programming Setting A9 ON)
Off
Toggles On and OFF
once per second
Fault Condition
(Advanced Programming Setting A7 OFF) Toggles On and Off
once per second

Fault Condition (Advanced Programming Set-
ting A7 ON)
Activated (On)

Diagram Symbol Page #
Power DIN AC 13
Power CPC DC 13
Inputs (M12)
14